MASTIGARDEN

product

MASTIGARDEN

Cod: 246 Categorie: Paste Sealing Materials Pret recomandat: RON Ambalare:

A Water-Based Bitumen Elastomeric Sealing Material

Cat. No. 246

Mastigarden is a waterbased bitumen elastomeric sealing material.

Mastigarden has excellent sealing features exhibiting flexibility and elasticity in a wide range of temperature (from –10°C to 100°C).

Mastigarden contains a special antiroot agent according to DIN 4062, in intensified quantity.

The Purpose

Mastigarden is mostly suitable for sealing of flower boxes and small roof gardens.

Technical Specifications

Appearance:

Black and brilliant paste

Specific weight:

1.18 gr/m³.

Viscosity:

> 40,000 CPS

Solid Content (%):

65.

Heat resistance at 80°c:

Material doesn’t slip or leak

Cold flexibility at -10°c:

Material doesn’t crack

Stagnant water resistance  

Mastigarden is resistant to stagnant water and remains attached to the base without generating bubbles. 

Elongation at break:

1000%

Resilience:

85%

Climatic resistance:

Very good (after coating with "bitumsilver").

Application

Before use the surface shall be cleaned and all dirt removed.

Primary layer of Mastigum primer shall be applied and dry for 1-3 hours. Then the coating shall applied as follows:

  1. Apply a layer of Mastigarden, 1.5 kg m², and let dry for 2-4 hours.
  2. Apply the second layer of Mastigarden, 1.5 kg /m². let it dry for 2-4 hours.
  3. Apply the third layer of Mastigarden, 1.5 kg/m². let it dry for 7 days prior to filling with soil for cultivation.
  4. For drainage improvement of the flower box, it is recommended to spread a geotextile fleece over flower box walls/floor.
  5. Than, spread a small size aggregates in layer of 5 cm thick and spread another layer of geotextile prior to filling with soil for cultivation.

Consumption

1.5 kg/m² in each layer (3 layers).

Drying Time

Dry to contact time – 2-4 hours.

Final dry time – one week.

Packaging

18 Lit., 4.5 Lit.

Notes

  • Do not store in cans at temperatures under 10°c (50ºf).
  • This product is ready for application and should not be diluted. If appears slightly thick, mix manually or mechanically to reduce viscosity.
  • Use an appropriate “Airless” sprayer to apply the product.
  • Immediately after use, clean tools first with water, then with turpentine.
  • The concrete surface will be dry for at least 3 days prior to the application of Mastigarden.
  • Do not apply the Mastigarden, if rain is expected within the next 4 days.
  • A flooding test may be preformed after 7 days from completing the application.

Related Documents

MASTIGARDEN.pdf